Garmin f?nix Gebruikershandleiding - Pagina 21
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin f?nix. Garmin f?nix 22 pagina's.
Pagina afdrukken• To make changes to the waypoint, select Edit, make
changes to the waypoint, and select Save.
Navigating to a Waypoint
1
Select the Orange key.
2
Select Start GPS.
3
Wait while the device locates satellites.
4
Select the Orange key.
5
Select Waypoints, and select a waypoint from the list.
6
Select Go.
The device displays time to destination
destination
, and estimated time of arrival
7
Select
to view the compass page.
The two pointer marks
orange mark
points in the direction you are facing.
8
Align the pointer marks with the top orange mark.
9
Continue to walk in that direction until you reach the
destination.
Navigating Using TracBack ®
While navigating, you can navigate back to the beginning of
your track. This can be helpful when finding your way back to
camp or the trail head.
1
Select the Orange key.
2
Select Tracks > Current > TracBack.
Your current location
appear on the map.
Stopping Navigation
1
Select the Orange key.
2
Select Stop Nav..
, distance to
.
serve as a bearing pointer. The top
, track to follow
, and end point
ANT+™ Sensors
Your device can be used with wireless ANT+ sensors. For more
information about compatibility and purchasing optional
sensors, go to http://buy.garmin.com.
Putting On the Heart Rate Monitor
NOTE: If you do not have a heart rate monitor, you can skip this
task.
You should wear the heart rate monitor directly on your skin,
just below your breastplate. It should be snug enough to stay in
place during your activity.
1
Snap the heart rate monitor module
2
Wet both electrodes
strong connection between your chest and the transmitter.
3
Wrap the strap around your chest, and connect the strap
hook
to the loop.
The Garmin
logo should be right-side up.
®
4
Bring the device within range (3 m) of the heart rate monitor.
TIP: If the heart rate data is erratic or does not appear, you
may have to tighten the strap on your chest or warm up for
5–10 minutes.
After you put on the heart rate monitor, it is on standby and
ready to send data.
Pairing Your ANT+ Sensors
Before you can pair, you must put on the heart rate monitor or
install the sensor.
Pairing is the connecting of ANT+ wireless sensors, for
example, connecting a heart rate monitor with your Garmin
device.
1
Bring the device with range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Select the Orange key.
3
Select Setup > ANT Sensor.
4
Select your sensor.
5
Select New Search.
When the sensor is paired with your device, the sensor
status changes from Searching to Connected. Sensor data
appears in the data page loop or a custom data field.
Troubleshooting
Getting the Owner's Manual
You can get the latest owner's manual from the web.
1
Go to www.garmin.com/support.
2
Select Product Documentation.
3
Follow the on-screen instructions to select your product.
Locking the Keys
You can lock the keys to prevent inadvertent key presses.
1
Select the data page you want to view while the keys are
locked.
onto the strap.
on the back of the strap to create a
3