Garmin fenix 2 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin fenix 2. Garmin fenix 2 26 pagina's. Sports and fitness gps-devices
Ook voor Garmin fenix 2: Beknopte handleiding (25 pagina's), Snelstarthandleiding (4 pagina's)

Pagina afdrukken

1. Clock

WAAS: Sets the device to use Wide Area Augmentation

System (WAAS) GPS signals. For information about WAAS,

go to www.garmin.com/aboutGPS/waas.html.

Hot Keys: Allows you to customize the hold function of the

DOWN key.

USB Mode: Sets the device to use mass storage mode or

Garmin mode when connected to a computer.

Map: Allows you to change the appearance of the map.

Pos. Format: Sets the position format, datum, and spheroid

used to calculate your GPS coordinates.

Menu: Allows you to customize the items that appear in the

main menu.

Reset: Allows you to reset user data and settings.

About: Displays device, software, and license information.

Customizing the Hot Key

You can customize the hold function of the DOWN key. By

default, holding DOWN marks a waypoint.

Hold MENU.

Select Settings > System > Hot Keys > Hold Down.

Select a function.

Map Settings

To open the map settings, hold MENU, and select Settings >

System > Map.

Orientation: sets how the map is shown on the page. North Up

sets how the map shows north at the top of the page. Track

Up shows your current direction of travel toward the top of

the page.

Auto Zoom: Automatically selects the appropriate zoom level

for optimal use on your map. When Off is selected, you must

zoom in or out manually.

Points: Sets the zoom level for points on the map.

Track Log: Allows you to show or hide tracks on the map.

Go To Line: Allows you to select how the course appears on

the map.

Map Colors: Allows you to select whether land or water is

highlighted on the map.

Position Format Settings

NOTE: Do not change the position format or the map datum

coordinate system unless you are using a map or chart that

specifies a different position format.

Hold MENU, and select Settings > System > Pos. Format.

Format: Sets the position format in which a given location

reading appears.

Datum: Sets the coordinate system on which the map is

structured.

Spheroid: Shows the coordinate system the device is using.

The default coordinate system is WGS 84.

Customizing the Main Menu

You can add, delete, or move items in the main menu.

Hold MENU.

Select Settings > System > Menu.

Select a menu item.

Select an option:

• Select Move Up or Move Down to change the location of

the item in the list.

• Select Remove to delete an item from the list.

• Select Insert to add an item to the list.

Resetting the Device to Factory Settings

You can restore all of the device settings to the factory default

values.

Hold MENU.

Select Settings > System > Reset > All Settings.

ANT+ Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• Heart rate monitor, such as HRM-Run

Rate

Monitor)

• Bike speed and cadence sensor

Cadence

Sensor)

• Foot pod

(Foot

Pod)

• Power sensor, such as Vector

• tempe wireless temperature sensor (tempe)

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

Pairing ANT+ Sensors

Before you can pair ANT+ sensors, Bluetooth wireless

technology must be turned off

Your fēnix 2

Device).

The first time you connect a sensor to your device using ANT+

wireless technology, you must pair the device and sensor. Once

paired, the device connects to the sensor automatically when

you start an activity and the sensor is active and within range.

NOTE: If a heart rate monitor was bundled with your device, the

included heart rate monitor is already paired with your device.

If you are pairing a heart rate monitor, put on the heart rate

monitor

(Putting On the Heart Rate

The heart rate monitor does not send or receive data until

you put it on.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors

while pairing.

Hold MENU.

Select Settings > Sensors.

Select your sensor.

Select New Search.

When the sensor is paired with your device, the sensor

status changes from Searching to Connected. Sensor data

appears in the data page loop or a custom data field.

tempe

The tempe is an ANT+ wireless temperature sensor. You can

attach the sensor to a secure strap or loop where it is exposed

to ambient air, and therefore, provides a consistent source of

accurate temperature data. You must pair the tempe with your

device to display temperature data from the tempe.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this

task.

You should wear the heart rate monitor directly on your skin,

just below your breastplate. It should be snug enough to stay in

place during your activity.

Snap the heart rate monitor module

(Putting On the Heart

(Using an Optional Bike

(Pairing Your Smartphone with

Monitor).

onto the strap.

ANT+ Sensors