Garmin Fenix 3 Gebruikershandleiding - Pagina 19

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin Fenix 3. Garmin Fenix 3 26 pagina's. Gps watch garmin fenix 3
Ook voor Garmin Fenix 3: Gebruikershandleiding (28 pagina's)

Pagina afdrukken

Backlight: Adjusts the backlight settings

Sounds: Sets the device sounds, such as key tones, alerts, and

vibrations.

Units: Sets the units of measure used on the device

the Units of

Measure).

GLONASS: The default satellite system option is GPS. You can

enable the GLONASS option for increased performance in

challenging environments and faster position acquisition.

Using the GPS and GLONASS options can reduce battery

life more than using the GPS option only.

Format: Sets general format preferences, such as the pace and

speed shown during activities, and the start of the week.

Data Recording: Sets how the device records activity data. The

Smart recording option (default) allows for longer activity

recordings. The Every Second recording option provides

more detailed activity recordings, but may not record entire

activities that last for longer periods of time.

USB Mode: Sets the device to use mass storage mode or

Garmin mode when connected to a computer.

Restore Defaults: Allows you to reset user data and settings

(Restoring All Default

Settings).

Software Update: Uses a Wi‑Fi connection to check for

software updates to the device.

About: Displays device, software, and license information.

Time Settings

Hold UP, and select Settings > System > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Set Time: Sets the time zone for the device. The Auto option

sets the time zone automatically based on your GPS position.

Time: Allows you to adjust the time if it is set to the Manual

option.

Backlight Settings

Hold UP, and select Settings > System > Backlight.

Mode: Sets the backlight to turn on manually or for keys and

alerts.

Timeout: Sets the length of time before the backlight turns off.

Brightness: Sets the brighness level of the backlight.

Changing the Units of Measure

You can customize units of measure for distance, pace and

speed, elevation, weight, height, and temperature.

Hold UP.

Select Settings > System > Units.

Select a measurement type.

Select a unit of measure.

Navigation Settings

You can customize the map features and appearance when

navigating to a destination.

Customizing Map Features

Hold UP, select Settings > Navigation.

Select an option:

• Select Map to turn the map on or off.

• Select Guide to turn a guide page on or off that shows

your compass bearing to follow while navigating.

• Select a screen to add, remove, and customize data

screens shown when navigating.

ANT+ Sensors

(Backlight

Settings).

(Changing

ANT+ Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• Heart rate monitor, such as HRM-Run

Rate

Monitor)

• Bike speed and cadence sensor

Cadence

Sensor)

• Foot pod

(Foot

Pod)

• Power sensor, such as Vector

• tempe

wireless temperature sensor (tempe)

™

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

Pairing ANT+ Sensors

The first time you connect a sensor to your device using ANT+

wireless technology, you must pair the device and sensor. After

they are paired, the device connects to the sensor automatically

when you start an activity and the sensor is active and within

range.

NOTE: If a heart rate monitor was bundled with your device, the

included heart rate monitor is already paired with your device.

If you are pairing a heart rate monitor, put on the heart rate

monitor

(Putting On the Heart Rate

The heart rate monitor does not send or receive data until

you put it on.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors

while pairing.

Hold UP.

Select Settings > Sensors > Add New.

Select an option:

• Select Search All.

• Select your sensor type.

After the sensor is paired with your device, the sensor status

changes from Searching to Connected. Sensor data appears

in the data page loop or a custom data field.

tempe

The tempe is an ANT+ wireless temperature sensor. You can

attach the sensor to a secure strap or loop where it is exposed

to ambient air, and therefore, provides a consistent source of

accurate temperature data. You must pair the tempe with your

device to display temperature data from the tempe.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this

task.

You should wear the heart rate monitor directly on your skin, just

below your sternum. It should be snug enough to stay in place

during your activity.

Snap the heart rate monitor module

The Garmin logos on the module and the strap should be

right-side up.

Wet the electrodes

and the contact patches

of the strap to create a strong connection between your chest

and the transmitter.

(Putting On the Heart

(Using an Optional Bike

™

Monitor).

onto the strap.

on the back