Alive Air Air Purifier Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alive Air Air Purifier. Alive Air Air Purifier 17 pagina's. Alive air 9-stage air purifier owner’s manual
Ook voor Alive Air Air Purifier: Gebruikershandleiding (17 pagina's)
Pagina afdrukkenAUTOMATIC OPERATION - Setting & Using "Auto" Mode
Your advanced technology air purifier is equipped with a sophisticated air quality sensor capable of
detecting elevated levels of odor, dust, or irritants in the air. When set to "AUTO" using the unit's
Flow button, the air purifier automatically adjusts its operational mode (switching between LOW and
MED) according to the indoor air pollution levels detected by the sensor.
unit's AUTO function you
below
BEFORE
setting the unit's AUTO function.
Programming A Clean Air Reference
IMPORTANT:
DO NOT
such as mold, mildew, tobacco smoke, a wood-burning fireplace, pets, freshly painted walls, new
flooring or new carpeting that is still 'out gassing' chemical fumes, etc. Such conditions will not allow
the air purifier's sensor to accurately establish a "clean air reference" on which to base the Auto Setting.
If these conditions exist, simply set the unit to MEDIUM or HIGH and operate manually without any
further set up as described above in the section entitled BASIC OPERATION - Manually Operating
Your Air Purifier.
1. Turn on your air purifier and IMMEDIATELY push the FLOW button to set the unit on HIGH and let it run
continuously for 3 hrs with the UV light ON to purify the air in the room.
2. Leaving the machine with power set to ON, UNPLUG it from the wall for 10 seconds.
3. PLUG it back in. The odor indicator light will blink as it samples and memorizes the existing purified air
condition. After two minutes, the indicator light will stop blinking to indicate the end of memorization.
(The existing indoor air quality will then serve as the baseline definition for 'Clean Air').
4. Push the FLOW button to set the unit on AUTO and leave it on that setting. 'SET IT AND FORGET IT'.
5. Using the established 'clean air reference,' the air quality sensor will then detect changes in air quality
that exceed the reference point and adjust the unit's settings accordingly. Of course, you can always put
it on the other speed settings, such as QUIET for sleeping or on HIGH if you are, for example, expecting
company and want the air to be cleaned faster.
PLEASE NOTE: After you have a 'clean air reference' for the AUTO SENSOR, your air purifier
is made to run 24/7, summer, winter, spring, fall, windows open/windows closed. However, when-
ever you do unplug the air purifier, have a power outage, turn off the unit for some other reason,
or remove the face-plate to clean the pre-filters, the memory of the 'clean air reference' will be
erased and you will need to repeat these procedures to establish a new 'clean air reference.'
Sometimes the sensor is not as sensitive when first purchased or after being unplugged for over
a week. Its sensitivity will begin to increase after one to two days of operation.
Please watch our 7 'Video Instructions' on all aspects of using and setting up the Alive Air Purifier.
www.aliveairpurifier.com/alive-air-video-help.
Any questions, feel free to call
Alive Air 9-Stage Air Purifier Owner's Manual
MUST
first program a 'clean air reference' using the procedures described
attempt to use the Auto Setting if you have any unusual air quality conditions
1-800-215-1689
and we'd be glad to help.
6
HOWEVER
, to use the