Brother 1 Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Brother 1. Brother 1 8 pagina's.

1 therefore does not need a magnetic KnitLink arm to enable interactive knitting for these two

models of knitting machine. (In order to do Interactive Knitting with other Brother machines it is

necessary to attach a magnetic KnitLink Arm to the carriage.)

These two machines produce the signal only if the KC setting is selected on the carriage. This

setting is always necessary for patterned knitting as it engages the patterning belt, but it is also

necessary when doing plain knitting interactively.

Once knitting has begun (using the amber or green traffic light buttons), each time the carriage

passes the KnitLink box, the screen should update itself and show the instructions for the next

row.

Plain Knitting with KH940 or KH950i

There are some disadvantages of using the KC setting for plain knitting: engaging the patterning

belt makes the carriage noisier and harder to push, and it is also necessary first to download a

blank pattern to the machine.

If it is required to do much plain knitting, it may therefore be preferable to purchase the KnitLink

Arm. Adding it converts a USB Brotherlink 1 to a USB Brotherlink 5. The signal to DesignaKnit is

then provided by the KnitLink Arm and Box, instead of the patterning belt. Plain knitting is

therefore easier, quieter, and it is not necessary to download a blank pattern first.

Updating the Driver from the Internet

From time to time the manufacturer of the chips in the cable link publishes a new driver because

a modification may be necessary for it to work with newly published Windows updates. We

recommend that from time to time you follow the instructions on this webpage to keep the driver

updated. If you have a problem with the cable link at any time it is a good idea to update the

driver before contacting technical support.

https://softbyte.co.uk/updatinganexistingdriver.htm

Troubleshooting

If Windows reported a problem when trying to install the driver from the internet, or Device

Manager shows a yellow error icon next to the serial port, or there is a yellow error icon next to

an "Unknown device", try using the driver installer. Either follow the directions in this document

under "Installing the driver from CD", or from https://softbyte.co.uk/cablelinksdriver.htm.

If your DesignaKnit computer is not connected to the internet, download a driver installer here

and transfer it on a pen drive: https://softbyte.co.uk/cablelinksdriver.htm.

Updating the cable link driver: please see

https://softbyte.co.uk/updatinganexistingdriver.htm

For problems uploading or downloading, please see

https://softbyte.co.uk/uploading&downloadingwithbrotherlinks.htm

For problems with interactive knitting, please see

https://softbyte.co.uk/interactiveknittingwithbrotherpassapscreenlinks.htm

The document you are reading was updated in February 2020.

The most recent editions of cable link manuals may be found at

https://softbyte.co.uk/cablelinkmanuals.htm

Soft Byte Ltd 2017