Garmin NavComm SL30 Gebruikershandleiding - Pagina 29

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin NavComm SL30. Garmin NavComm SL30 48 pagina's. Vhf transceiver
Ook voor Garmin NavComm SL30: Snelle referentiehandleiding (2 pagina's), Installatie (2 pagina's)

Pagina afdrukken

the additional information only switches sides after the

CDI deflection has exceeded two degrees on the side that

is currently used.

Localizer

A localizer (ILS) frequency is distinguished from the

VOR OBS display by the label, "loc," to the left of the

CDI rather than the OBS course. If the back course is

selected, then "bc" will appear as additional information.

The "loc" label is replaced by the station's Morse code

identifier after it is decoded. The CDI display will be

dashed and marked flagged if no signal is detected on the

active channel.

109.90 s117.40

Back Course

When a localizer channel is active and the SL30 is in Nav

SEL

mode, the

button will bring up a prompt to enable or

disable the Back Course mode. The

enable the Back Course mode. The

scroll through the recall lists. Back Course mode is not

available if the SL30 is set to use an external indicator

head with a built-in VOR/LOC converter.

When you set up the Back Course approach in your SL30,

no additional setup is required for your HSI or autopilot.

The SL30 corrects the Left/Right deviation indications to

your HSI and autopilot, if they are coupled to the SL30.

In addition, the Glideslope indicator will be flagged and

the needle will be centered. This will make the Back

Course approach easier since false or misleading

glideslope information is not displayed.

SL30

NAV

and then set the appropriate Localizer

1) Press

channel into the Active position.

2) Enable the Back Course. Press

111.10 s116.00

Advanced Operation

A}}

loc

ENT

LARGE

knob will still

SEL

and then

Enable backcrs?

button will

ENT