Brother 885-X01 Bedieningshandleiding - Pagina 6

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Brother 885-X01. Brother 885-X01 44 pagina's.
Ook voor Brother 885-X01: Operationele handleiding (44 pagina's), Bedieningshandleiding (44 pagina's), Bedieningshandleiding (44 pagina's)

Pagina afdrukken

KNOWING YOUR SEWING MACHINE — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

THE MAIN PARTS

1 Bobbin winder (Page 11)

This winds the thread onto the bobbin for use as the

lower thread.

2 Spool pin (Page 11, 15)

This holds the spool of thread.

3 Upper tension-control dial (Page 25)

This controls the tension of the upper thread.

4 Thread guide (Page 11, 15)

This is used when winding the thread onto the

bobbin and then threading the machine.

5 Thread take-up lever (Page 16)

6 Thread cutter (Page 22)

Pass the threads through the thread cutter to cut

them.

7 Needle threader (Page 17)

(This is only available on certain models.)

8 Quick-set bobbin (Page 14, 19)

(This is only available on certain models.)

9 Flat bed attachment with accessory compartment

(Page 5)

0 Presser foot (Page 8)

A Reverse sewing lever (Page 10)

Push this lever to stitch in the reverse direction.

B Pattern selection dial (Page 9)

Rotate the dial in either direction to choose the

stitch you want.

C Handwheel

Used to manually raise and lower the needle.

D Buttonhole fine-adjustment screw (Page 31)

E Main power and sewing light switch (Page 7)

You can turn the main power and sewing light

switch on and off.

F Foot controller jack / socket (Page 6)

Plug in the foot controller plug and connect the

machine to the power supply.

G Presser foot lever (Page 15)

Used to raise and lower the presser foot.

H Foot controller (Page 7)

You can use this to control the sewing speed, and to

start and stop sewing.

Foot Controller: Model KD-1902 for 110/120V area

Model KD-2902 for 220/240V area

The foot controller part code differs depending on the

country or region. Contact your dealer or the nearest

authorized service center.

Flat bed attachment

The accessories can be stored in a compartment inside

the flat bed attachment.

Slide the flat bed attachment to the left to

open it.

1 Flat bed attachment

2 Storage compartment