Brother 888X64 Series Bedieningshandleiding - Pagina 22
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Brother 888X64 Series. Brother 888X64 Series 48 pagina's.
Ook voor Brother 888X64 Series: Bedieningshandleiding (2 pagina's), Bedieningshandleiding (47 pagina's), Bedieningshandleiding (2 pagina's), Bedieningshandleiding (48 pagina's), Bedieningshandleiding (3 pagina's)
Pagina afdrukken
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
While lightly holding the thread, turn the
6
needle threader lever toward the front of
the machine (toward you). The hook will
pull the thread through the needle.
Raise the needle threader lever.
7
Pull the loop of the thread passed through
8
the eye of the needle toward the rear of
the machine.
1 Loop of thread
CAUTION
●
Be careful not to pull on the thread with
force or it may bend the needle.
●
If the thread does not pass through the
eye of the needle, start from step
again.
Raise the presser foot lever.
9
0
1
3
Pass the end of the thread through the
presser foot, and then pull out about 5 cm
(2 inches) of thread toward the rear of the
machine.
1
1 5 cm (2 inches)
Note
● If you incorrectly feed the thread you may
cause sewing problems.
1
20