Garmin GDL 69 Activatie-instructies - Pagina 8

Blader online of download pdf Activatie-instructies voor {categorie_naam} Garmin GDL 69. Garmin GDL 69 38 pagina's. Xm satellite radio instructions for continued airworthiness
Ook voor Garmin GDL 69: Activatie-instructies (46 pagina's), Handleiding voor piloten Addendum (50 pagina's), Handleiding voor piloten Addendum (50 pagina's), Activatie-instructies (16 pagina's), Gebruiksaanwijzing (44 pagina's), Gebruiksaanwijzing (8 pagina's), Handmatig (15 pagina's)

Garmin GDL 69 Activatie-instructies

2 MX20 - GDL 69/69A Activation

The MX20 must be correctly configured to accept information from a GDL 69/69A, in accordance with
the MX20 Multi-Function Display Installation Manual, P/N 560-1025-( ).

2.1 Activation Steps

1. Make sure that the aircraft's XM antenna has an unobstructed view of the southern sky.
It is highly recommended that the aircraft be outside of and away from the hangar.
2. Hook up the aircraft to external power if available.
The complete activation process may take 45-60 minutes or more, depending on the demand on the
XM activation system.
3. Power on the avionics and allow the MX20 and GDL 69/69A to power up.
Do not power cycle the units during the activation process.
4. Verify that the yellow "GDL 69" failure flag is not displayed.
The absence of a failure flag confirms that the MX20 is communicating with the GDL 69/69A.
5. Go to the XM Activation Page.
a) Press the FN key until the FIS function is displayed. Press the FIS smart key.
b) Press the fourth smart key until STATUS is displayed.
c) Press the MENU/ENT key.
d) Press the line select key next to Products. Diagnostics and Start Diag will be displayed. (in
software version 5.5, Start Diag will not be displayed.)
e) Press the line select key next to Diagnostics.
f) Activation will be displayed.
6. To activate service, call XM at 1.800.985.9200.
When activating the data service, specify Aviator LT, Aviator, or Aviator Pro. XM service should
activate in 45 to 60 minutes. During the activation process the unit may display several different
activation levels. This is normal and should be ignored. When the service class (Aviator LT,
Aviator, or Aviator Pro) and all of the weather products for the class that you subscribed to are
displayed, press the Accept smart key. See Table 2-1 for weather products available for the MX20.
Wait 10 to 30 seconds to allow the GDL 69/69A to process the accept command and lock in the
activation.
During the activation process do not change channels or pages during this time.
Page 2
190-00355-04
NOTE
XM Activation Procedures
Rev. H