Garmin GIA 6300 Installatie-informatie - Pagina 7

Blader online of download pdf Installatie-informatie voor {categorie_naam} Garmin GIA 6300. Garmin GIA 6300 14 pagina's.

Speaker Outputs

5.4.1 Transceiver Interfaces

The GIA 6300 supports a total of 8 radio transceivers including the internal VHF COM radio. One of

these interfaces is used to connect to the cross-side GIA 6300 VHF COM.

Four transceiver inputs can be configured as microphone inputs. This allows a total of 8 passenger or

support staff positions per GIA 6300. In cases where both 8 passenger microphones and 8 transceivers

are required, some of the receiver and alert inputs can be repurposed as transceiver inputs.

The GIA 6300 has a total of 11 differential audio inputs. These can be used as either un-switched, alert

inputs or as inputs from radio receivers. Two of these inputs are used to interface from the cross-side

GIA 6300 NAV radio and Alert Output.

With the division list in Table XXX, the GIA 6300 will be capable of supporting up to 8 receiver inputs

including the integrated NAV radio.

The GIA 6300 will be capable of supporting 2 crew members and 4 or 8 passenger headset locations per

unit. This is facilitated with 2 headset-microphone crew locations and a two passenger headset outputs

with 4 microphone locations (and the 4 configurable Transceiver/Microphone inputs).

The Pilot Headset and Microphone interface has a hardware failsafe connection to the integrated VHF

COM. When in hardware failsafe, the Pilot microphone input will be hardwired through relays to the

COM input and the COM output will be hardwired through relays to the Pilot Left Headset output.

Each of the passenger headset output is capable of driving 4 stereo headsets in parallel. If desired, the

output can be configured as two mono channels allowing 2 groups of passengers to receive separate,

mono selected audio sources per output. The total number of passengers supported by the GIA 6300 is

limited by microphone inputs, 8.

The GIA 6300 has 2, digital, AES3 interfaces (primary and secondary). The primary AES3 interface

implements carries ICS, communication, and navigation related audio between GIAs.

The secondary AES3 interface can be used to carry high fidelity music audio. This secondary interface

will be configurable to either carry 8 (4 stereo) high fidelity channels, or 24 low fidelity channels (just like

the primary AES3 interface).

190-01561-00

Draft1

GIA 6300 Installation Manual

Page 7