Garmin GNC 420 Snelle referentie - Pagina 4

Blader online of download pdf Snelle referentie voor {categorie_naam} Garmin GNC 420. Garmin GNC 420 17 pagina's. 400/500 series gts 8xx interface
Ook voor Garmin GNC 420: Gebruiksaanwijzing (6 pagina's), Handleiding voor piloten Addendum (27 pagina's), Handleiding voor piloten Addendum (4 pagina's), Snelle referentie (23 pagina's), Handleiding voor piloten Addendum (22 pagina's), Handboek voor piloten (8 pagina's)

Pagina afdrukken
Garmin GNC 420 Snelle referentie
Screen Layout / CURSORs / Frequency Selection
{
COM Window
{
User Selectable
Data field
The GNC 420's display is divided into three separate "windows" (or
screen areas). The left 1/4 of the display provides a COM window (top two
lines) and a user-defined data field below. The right 3/4 of the display con-
sists of a GPS window for the various navigation, waypoint information and
settings pages. The bottom of the display is used for annunciators.
Each unique screen of information is referred to as a "page". Pages are
typically selected using the small (
cursor removed from the GPS window. See the following page for details
on arrangement of the GNC 420's main pages.
There are two separate cursors: a tuning cursor and a GPS window
cursor. The tuning cursor is used to select the standby COM frequency.
f
h
Use the small (
) and large (
W
cy. The COM (
) flip-flop key is used to activate the selected frequency.
Active Frequency on top &
Standby on bottom
(highlighted by cursor)
}
GPS Window
a
d
) and large (
) right knobs—with the
) left knobs to select the desired frequen-
h
f
W
The GPS window cursor is used
to select the desired fields. Press
a
the small right knob (
) to activate
the cursor. Press again to deactivate
d
it. The large right knob (
) is used
to move the cursor about the page.
a
The small right knob (
) is used to
select individual characters for the
highlighted cursor location (see
illustration).