Garmin GNC 420A Handleiding voor piloten Addendum - Pagina 13

Blader online of download pdf Handleiding voor piloten Addendum voor {categorie_naam} Garmin GNC 420A. Garmin GNC 420A 22 pagina's. 400/500 series gts 8xx interface
Ook voor Garmin GNC 420A: Gebruiksaanwijzing (6 pagina's), Handleiding voor piloten Addendum (27 pagina's), Handleiding voor piloten Addendum (4 pagina's), Snelle referentie (23 pagina's)

1.8

TRAffIC PAGe

Traffic can be displayed both on the Map Page (only if heading is available) and

on the Traffic Page (Figure 4). The orientation source shown at the top of the display

first uses heading ('HDG'), then GPS Track ('TRK') if no heading is available, to orient

the display.

If the GTS 8XX does not have bearing information for an active TA, 'TA' followed by

range, relative altitude, and altitude trend is displayed in the lower right corner. The

Traffic Banner is displayed if more than one TA with no bearing info is active, while the

TA of most immediate threat is displayed in text below the banner.

Display

Range

1.9

The display range on the Traffic Page can be changed at any time.

Changing the display range on the Traffic Page:

Press the RNG Key to step through the following range options:

• 2 nm

• 2 and 6 nm

• 6 and 12 nm

• 12 and 24 nm (GTS 820/850 only)

• 24 and 40 nm (GTS 820/850 only)

190-00140-78 Rev. A

Orientation Source

Traffic

Figure 4 Traffic Page

400/500 Pilot's Guide Addendum for GTS 8XX Interface

GTS 8XX Interface

Operating Mode

Traffic Banner

Traffic Advisory

(with no bearing

information)