AlkaViva The ionpia H2 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AlkaViva The ionpia H2. AlkaViva The ionpia H2 13 pagina's.

4. Swing the filter outwards at a 90-degree angle and turn counter clockwise a quarter

turn to release. Then remove by pulling straight out of the filter saddle. See Figure 1.

5. Hold the new filter at a 90-degree angle and place into the filter saddle by aligning the

grooves. Press it in and turn clockwise a quarter turn to lock it into place. See Figure 2.

6. After installing your new filters, close the Filter Cover.

7. Turn on source water to the ionpia using either the diverter or the Cold Water Supply.

8. It is important to flush the filters before you start drinking the water. Do this by running

water through the unit for several minutes (or until clear) and discard the water.

Fig. 1

Removing Filter

Fig. 2

Installing Filter

Page 11

HYDROGEN GENERATOR