AlkaWay HIM-19 Gebruiksaanwijzing - Pagina 8
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AlkaWay HIM-19. AlkaWay HIM-19 8 pagina's. Hydrogen inhaler
Pagina afdrukken
Trouble Shooting
Issue
Possible Reason
1. Power plug is not plugged in
The machine is
2.
not starting
3.
1. Not enough water in tank
2. The cannula is not properly
There is no
3. The bubbler is not properly
Hydrogen gas
4. TDS value of the distilled water is
1. Unit has been tilted more than 30
Imbalance error
1. Scale formation in electrolytic cell
Abnormal display
2. The display is abnormal
value
3. The TDS value is too high
1. Water level is low, or
Alarm sound
2. Water level too high
1.
Screen blank
2.
If you run into any other problems, contact your AlkaWay Sales Support Team on 1800 268 469 or
email us at [email protected]
properly
ON/OFF button has not been
pressed
Is in screen saver mode
connected
connected
too high
degrees and will return an
imbalance error
Screen saver mode
Machine is not turned on
Solutions
1.
Check that the plug is plugged in
properly
2. Check the Power is ON at the wall
3. Press the setting icon
1. Fill the water tank to the top line on
the water viewing panel.
2. Ensure the cannula is properly
connected and there are no tangles,
kinks or that the tube is blocked with
water
3. Replace and flush with distilled water
(TDS<3) water in the tank and start
it again
4. Contact your Sales Support Team
1. Place machine on a level surface and
restart the machine.
1. Contact your Sales Support Team -
1800 268 469
1. Add more distilled water (TDS<3) or
2. Drain out water from the tank until
the water level is below the top
(Max) mark on the water viewing
panel
1. Press the setting icon
2. Turn on power
8