Garmin echomap 40 series Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin echomap 40 series. Garmin echomap 40 series 32 pagina's. Vhf comm
Ook voor Garmin echomap 40 series: Handleiding voor installatie-instructies (15 pagina's), Conformiteitsverklaring (1 pagina's), Handleiding voor piloten (22 pagina's), Gebruikershandleiding (30 pagina's), Gebruikershandleiding (50 pagina's)

GMR 20/40 O

PERATION

To Deﬁne a Guard Zone:

1. Using the ARROW KEYPAD, highlight Show Guard Zone 1/2

and press the ENTER key.

2. Using the ARROW KEYPAD, highlight Adjust and press the

ENTER key.

3. Using the ARROW KEYPAD, deﬁne the desired area on the

Radar page.

4. Press the ENTER key to accept the change.

With a Guard Zone selected on the Radar page, Soft Key options may

be available.

VRM/EBL

The VRM (Variable Range Marker) and EBL (Electronic Bearing

Line) tools measure range and bearing to a target. The center point

of the VRM can be moved, allowing measurement from one target to

another. Two V/E tools can be activated at the same time.

The VRM/EBL Menu has two areas, "VRM/EBL 1" and "VRM/EBL

2." Each area has two settings, a setting to Show/Hide the VRM/EBL

and Adjust.

To activate VRM/EBL 1 or 2:

Using the ARROW KEYPAD, highlight Show VRM/EBL 1/2

and press the ENTER key.

ADAR

DJUSTMENT

ENU

The diameter of the VRM and the angle of the EBL are adjustable.

To adjust the VRM/EBL:

1. Using the ARROW KEYPAD, highlight Adjust and press the

ENTER key.

2. Press the ARROW KEYPAD right/left to rotate the Electronic

Bearing Line around the center point of the VRM.

3. Press the ARROW KEYPAD up/down to increase/decrease

the size of the Variable Range Marker.

4. Press the ENTER key to accept the changes.

Variable Range Marker

(VRM)

Electronic Bearing Line

(EBL)

GMR 20/40 Owner's Manual