Garmin ECHOMAP UHD2 7 Series Handleiding voor installatie-instructies - Pagina 2
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin ECHOMAP UHD2 7 Series. Garmin ECHOMAP UHD2 7 Series 15 pagina's.
Pagina afdrukken
Tools Needed
• Drill
• Drill bits
◦ Bail mount, fixed or swivel: 3 mm (
◦ Flush mount: 3 mm (
• #2 Phillips screwdriver
• Jigsaw or rotary tool (flush mount)
• File and sandpaper (flush mount)
• Marine sealant (optional)
Mounting Considerations
You can mount the device using one of three methods.
Bail mount: You can mount the device using the bail mount, which allows you to tilt the device.
Swivel mount: You can mount the device using the swivel base and bail mount, which allows you to swivel and
tilt the device.
NOTE: The swivel base is not available for ECHOMAP UHD2 9 sv models.
Flush mount: You can mount the device in the dashboard, which provides a more integrated installation.
Before permanently installing any part of your device, you should plan the installation by determining the
location of the various components.
• The mounting location must provide a clear view of the screen and access to the keys on the device.
• The mounting location must be sturdy enough to support the device and the mount.
• The cables must be long enough to connect the components to each other and to power.
• To avoid interference with a magnetic compass, do not install the device closer to a compass than the
compass-safe distance value listed in the product specifications
2
1
/
in.) drill bit or drill bits appropriate for the surface and hardware
8
1
1
/
in.) and 12.7 mm (
/
8
2
in.) drill bits
(Specifications,
page 11).