Garmin GHP 10 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin GHP 10. Garmin GHP 10 28 pagina's. Autopilot system, addendum
Ook voor Garmin GHP 10: Handleiding voor installatie-instructies (48 pagina's), Handleiding voor installatie-instructies (26 pagina's), Conformiteitsverklaring (1 pagina's), Referentie (1 pagina's), Configuratie-opmerkingen (14 pagina's)

Powerboat Autopilot Operation

Cloverleaf Pattern

The cloverleaf pattern steers the boat to repeatedly pass over an active

waypoint. When you begin the cloverleaf pattern, the autopilot drives the

boat toward the active waypoint and begins the cloverleaf pattern.

setting up the Cloverleaf Pattern

You can adjust the distance from the waypoint at which the autopilot turns

your boat for another pass over the waypoint. The default setting turns the

boat at a range of 1000 ft. (300 m) from the active waypoint.

1. From the heading screen, select Menu > GPS Steering > Cloverleaf >

Length.

2. Select

3. Select Done.

Following the Cloverleaf Pattern

1. From the heading screen, select Menu > GPS Steering > Cloverleaf >

engage.

2. Select an option:

• Select

to begin a starboard turn.

• Select

to begin a port turn.

to set the length.

The autopilot steers your boat in a continuous cloverleaf pattern over

the active waypoint, and the heading screen shows the cloverleaf turn

direction and distance ➀.

The search pattern steers the boat in increasingly larger circles outward from

the active waypoint, forming a spiral pattern. When you begin the search

pattern, the autopilot drives the boat to the active waypoint and begins the

pattern.

setting up the search Pattern

You can adjust the distance between each circle in the spiral. The default

distance between the circles is 50 ft. (20 m).

1. From the heading screen, select Menu > GPS Steering > Search >

Spacing.

2. Select

3. Select Done.

➊

to set the spacing.

GHC 10 Owner's Manual