Garmin GPS 16-HVS Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Garmin GPS 16-HVS. Garmin GPS 16-HVS 30 pagina's. Instruction manual
Ook voor Garmin GPS 16-HVS: Referentiehandleiding (1 pagina's), Technische specificaties (40 pagina's), Technische specificaties (37 pagina's), Conformiteitsverklaring (2 pagina's), Gebruiksaanwijzing (30 pagina's)

Example: Public GPSdata as string * 101

Example: SerialIn (GPSData,com1,20,13,100)

4.1.3 SerialFlush

The SerialFlush instruction is used to clear all data from the buffer associated

with the serial port.

4.1.4 SerialClose

The SerialClose instruction is used to close the serial port. Once closed, the

SerialOpen command must be used before more data can be read.

4.2 Parsing and Data Storage Options

The CR1000, CR3000, CR800, and CR850 can store data as a string or as a

number. Every time the datalogger stores a string, the size of the string

determines the number of bytes used. If the string was declared to be 101

bytes long, every time the string is written to memory, 101 bytes are used.

Depending on the application, the entire GPGGA string can be stored to

memory or just specific parts. When storing specific parts, some numbers can

be converted to floating data points.

To parse the GPGGA string, first read the entire string into 1 large string (see

Section 4.1). Next parse the string into a group of smaller strings (see Section

4.2.1). Determine which of the smaller strings to keep and which to convert to

floating point number, then store the data.

4.2.1 SplitStr

Use the SplitStr instruction to parse the GPGGA string into an array of strings.

Declare an array of 18 strings of 15 characters.

Example: ParseStr(18) as string * 15

The SplitStr instruction uses the result string, search string, filter string,

number of splits and split option to parse the search string and store the results

in the result string. The GPGGA string uses the comma character (chr(44))

between each parameter. The comma makes a nice marker to parse on.

Example: SplitStr (ParseStr(1),GPSData ,chr(44),18,5)

Strings can be converted to floats with the simple assignment operator, but

Latitude and Longitude require more precision than the CR1000, CR3000,

CR800, or CR850 will store as a floating point number.

' Sample CR1000 program to read GPS NMEA GPGGA string

Public location, bytes

public GPSData as string * 101 ' $GPGGA string about 57 characters

PUBLIC ParseStr(18) as string * 15

' Aliases allow proper labels in output data tables,

' and when viewing public variables

alias ParseStr(1) = GPGGA

GPS16-HVS GPS Receiver