Garmin GPS 17HVS - Receiver Module Handleiding voor installatie-instructies - Pagina 10

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GPS 17HVS - Receiver Module. Garmin GPS 17HVS - Receiver Module 12 pagina's. Declaration of conformity
Ook voor Garmin GPS 17HVS - Receiver Module: Technische specificaties (34 pagina's), Installatiehandleiding (16 pagina's), Technische specificaties (40 pagina's), Technische specificaties (37 pagina's), Conformiteitsverklaring (2 pagina's)

Pagina afdrukken
Garmin GPS 17HVS - Receiver Module Handleiding voor installatie-instructies
I
I
NSTALLATION
NSTRUCTIONS
Final Wiring Connection
Once all the wiring is complete, plug the 18-pin harness into the center connector on the backside of the GPSMAP 2006/2010. The 5-pin port
on the right side is intended for future interfacing features and does not require connection at this time.
With power applied to the circuit, you may test the installation by pressing the POWER
key on the front of the unit. See the Owner's
Manual for steps on initializing the receiver.
5-Pin Connector
18-Pin Connector
(for future use)
10
GPSMAP 2006C/2010C & GPS 17