Garmin GPS 17HVS - Receiver Module Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Garmin GPS 17HVS - Receiver Module. Garmin GPS 17HVS - Receiver Module 16 pagina's. Declaration of conformity
Ook voor Garmin GPS 17HVS - Receiver Module: Handleiding voor installatie-instructies (12 pagina's), Technische specificaties (34 pagina's), Technische specificaties (40 pagina's), Technische specificaties (37 pagina's), Conformiteitsverklaring (2 pagina's)

Garmin GPS 17HVS - Receiver Module Installatiehandleiding
To mount the GPS 17 with cable through mount:
1. Position the mount in the desire location and mark
the approximate center of the mount
2. Drill a hole large enough for the cable to pass
through at the marked location.
3. Slide the cable through the mount and screw the
GPS 17 onto the mount.
4. Fasten the mount to the boat.
Figure 4: Running the Cable Through the Mount
GPS 17 Installation Guide

Routing the Cable

You can shorten or coil excess cable and secure it in an
inconspicuous location. When routing the power/data cable,
try to avoid the following things:
• Sharp edges that can cut the cable.
• Routing the cable parallel to other power lines.
• Excessively twisting, straining or bending the cable.
M
GPS 17
OUNTING THE
5