Garmin GPSMAP 2010 Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GPSMAP 2010. Garmin GPSMAP 2010 12 pagina's. Garmin gsd 20 marine-remote sounder: release note
Ook voor Garmin GPSMAP 2010: Conformiteitsverklaring (1 pagina's), Conformiteitsverklaring (1 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (20 pagina's)
Pagina afdrukken
I
I
NSTALLATION
NSTRUCTIONS
Surface Mount
Tools
• Drill and Drill Bit
• Screwdriver
• Pencil
• Mounting Hardware (not included)
NOTE: Mounting hardware (fasteners) not included. Mounting holes are 5/16"
(7.9 mm) in diameter.
To install the Bail Mount and unit:
1. Using the bail mount as a template, mark the location of the four mounting holes.
Be sure to leave at least two inches of clearance behind the unit for the wiring.
2. Using an appropriate size drill bit, drill pilot holes for the fasteners.
3. Secure the bail mount to the surface with the fasteners.
4. Loosen the mounting knobs.
5. Slide the unit into the bail mount and tighten the mounting knobs.
Bail mount
4
I
I
NSTALLATION
NSTRUCTIONS
Mounting knobs
Bail Mount
GPSMAP 2006C/2010C & GPS 17