Garmin GPSMAP 4210 Handleiding voor installatie-instructies - Pagina 20

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GPSMAP 4210. Garmin GPSMAP 4210 25 pagina's. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Ook voor Garmin GPSMAP 4210: Belangrijke veiligheidsinformatie (4 pagina's), Gebruikershandleiding (2 pagina's), Handleiding voor installatie-instructies (25 pagina's), Snelle referentiehandleiding (2 pagina's), Technische referentie (42 pagina's), Belangrijke informatie (2 pagina's), Supplement handleiding (24 pagina's)

Making the Final Connections to the GPSMAP 4000/5000 Series Chartplotter

After the power cable and the GPS antenna (as well as any optional Garmin Marine Network devices, NMEA 0183 devices, NMEA 2000

connections, or video connections) are wired to the boat, the cables must be connected to the GPSMAP 4000/5000 series chartplotter.

There are seven connectors on the back of the chartplotter, one for power, three for Garmin Marine Network devices, one for the NMEA 0183

cable, one for a NMEA 2000 cable, and one for the marine video cable.

To attach the power cable, the NMEA 0183 cable, and the marine video cable, carefully press the cable into the correct port on the back of the

chartplotter until it is firmly seated. Do not force the cable, because this may damage the pins. After the cable is seated, turn the locking ring

clockwise until it stops.

To attach a Garmin Marine Network cable or a NMEA 2000 Micro-connector cable, carefully press the cable into the correct port on the back of

the chartplotter until it is firmly seated. Do not force the cable, because this may damage the pins. After the cable is seated, turn the locking

ring clockwise until it is tight. Be careful not to overtighten the locking ring.

NMEA 2000 cable

Micro-connector

Garmin Marine Network

connectors

Your GPSMAP 4000/5000 series chartplotter may contain a software update SD card. If so, follow the instructions provided with the card.

If a software update SD card is not included, visit

version of software on your chartplotter, select or touch

GPSMAP 4000/5000 Series Connectors

updating the Chartplotter Software

www.garmin.com

Configure

to make sure your chartplotter software is up-to-date. To determine the

System

Information.

Power cable connector

Marine video cable

connector

NMEA 0183 cable

connector

GPSMAP 4000/5000 Series Installation Instructions