AEG NC4003000 Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG NC4003000. AEG NC4003000 28 pagina's. Oven

Installation

Problem

The oven does not heat up

The oven lamp does not oper-

ate

Steam and condensation settle

on the food and in the oven

cavity

The display shows "12.00"

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the appliance cavity.

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

INSTALLATION

WARNING!

Refer to "Safety information" chapter.

The built-in unit must meet the stability requirements of DIN 68930.

Possible cause

The necessary settings are not

set

The fuse in the fuse box is re-

leased

The oven lamp is defective

You left the dish in the oven

for too long

A power cut

Remedy

Control the settings

Control the fuse. If the fuse is

released more than one time,

refer to a qualified electrician.

Replace the oven lamp

Do not leave the dishes in the

oven for longer than 15-20 mi-

nutes after the cooking process

ends

Reset the clock

.........................................