A-Designs Hammer 2 EQ Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} A-Designs Hammer 2 EQ. A-Designs Hammer 2 EQ 8 pagina's.

Pagina afdrukken

WARNING!

Before you start your new HAMMER-EQ please read the following:

ANY real tube product is sensitive to a high SPL environment. This may cause microphonics in a recording situation. Make sure you are able to shock

mount and or place the unit in isolation if need be. Direct light will also affect tubes as well.

PLEASE be sure to have at least one rack space between any tube products from the product above and below the unit. This will ensure your tube unit

will not over heat. Over heating will cause damage to the tubes and shorten their life span. If possible, place the HAMMER unit in the top rack space to

allow air flow.

If you have received your unit via UPS/Fed-Ex/DHL, or any other courier, your HAMMER should have been double boxed for protection. If it was not

double boxed, please contact your dealer and return the unit to them for a replacement.

We demand ALL our units to be double boxed to help prevent damages during shipping.

Thank you,

Peter Montessi

President

A Designs Audio

LEGAL NOTICE:

Fill out and Return Warranty Card to A Designs. Warranty begins the day of purchase. Your name will be placed on our mailing list (unless otherwise

requested) for future updates and new product announcements.

A Designs reserves the right to make improvements or changes at any time to this product.

Published by: A Designs Audio

P.O. Box 4255

West Hills, CA 91304 U.S.A. Edition 1.0 2004

WARNING: Removing Cover Will Void Your Warranty.

1 Year Limited Warranty Internal Parts, 30-Day Limited Warranty Labor, 30-Day Limited Warranty Tubes

A Designs warrants that our hardware conforms substantially to the specifications contained in this manual when used in accordance these

specifications for a period of 1 year from the date of original purchase from A Designs or its authorized dealers. In case of a valid warranty claim, your

sole and exclusive remedy and A Designs' entire liability under any theory of liability will be, at its option, to repair or replace the product without charge,

or, if not possible, to refund the purchase price to you. The warranty is not transferable and applies only to the original purchaser of the product.

For warranty service, contact A Designs Audio at 818-716-4153 to obtain a Return Merchandise Authorization (RMA) number. After obtaining the RMA

number, ship defective product to A Designs Audio, P.O. Box 4255, West Hills, CA 91304. Write RMA number on outside of shipping box. Be sure to

include your name, address, phone number, copy of original sales invoice and detailed description of the problem. A Designs Audio will not accept

responsibility for loss or damage in shipping.

Warranty is void if product serial numbers have been removed or if the product has been damaged by abuse or unauthorized modification and repair.

There are no user serviceable parts inside.

THIS WARRANTY IS IN LIEU OF ALL WARRANTIES WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. A DESIGNS AUDIO MAKES

NO OTHER WARRANTY EITHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANT

ABILITY, UNLESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. PURCHASERS SOLE AND EXCLUSIVE REMEDY UNDER THIS

WARRANTY SHALL BE REPAIR OR REPLACEMENT AS SPECIFIED HEREIN.

IN NO EVENT WILL A DESIGNS AUDIO BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCREMENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM ANY DEFECT IN THE PRODUCT, INCLUDING LOST PROFITS, DAMAGE TO PROPERTY AND, TO THE EXTENT PERMITTED

BY LAW, DAMAGE FOR PERSONAL INJURY, EVEN IF A DESIGNS AUDIO HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.

A Designs, A Designs Audio, HAMMER 2EQ is a trademark of A Designs. All other trademarks are the property of their respective owners.