Garmin 30A Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin 30A. Garmin 30A 38 pagina's. Marine weather satellite receiver

Turn on the GDL 30/30A

The GDL30/30A turns on and off automatically with the chartplotter that it is

connected to. To verify proper operation, turn on the chartplotter and verify that

the Status LED on the front of the GDL30/30A is Green and blinking. For more

detail on the Blink Codes, see Appendix A.

With the GDL30/30A installed, contact XM Satellite Radio to activate your

XM WX weather and audio (GDL30A only) subscription service. Follow the

instructions below. Complete Steps 1-3 BEFORE calling XM Satellite Radio:

Step 1: Check the System Setup

Make certain the GDL 30/30A is fully wired and is connected to a chartplotter.

Verify that the GA 31 antenna has been properly installed. If you own a GDL

30A, verify that the audio cable is connected to your GDL 30A and to your

stereo receiver.

Step 2: Turn on your System

Turn on your chartplotter. This automatically turns on the GDL 30/30A.

Step 3: Identify Radio ID(s)

Press and hold down the ADJ/MENU key on your chartplotter. The Main Menu

page appears. A list of tabs appear down the left-hand side of the Menu page.

Using the ROCKER key, highlight the XM tab and select the Information sub

tab.

Write down the Radio ID - Weather and Radio ID - Audio (GDL 30A only).

Have the ID number, your billing address and other billing information ready

when you contact XM Satellite Radio.

Audio sub tab (it is next to the Information sub

(GDL 30A only) Select the

tab). Verify that XM Preview appears in the Radio Tuning box.

ETTING

Service Level ﬁeld

For future reference, record the Radio ID(s) in the space provided on

page 1 of this manual. Note: If you have a GDL 30, the Audio sub tab

is not available.

30/30

TARTED

TURNING ON THE GDL

Weather Products list

GDL 30/30A Owner's Manual