Garmin Colorado 400c Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin Colorado 400c. Garmin Colorado 400c 48 pagina's. Oregon series
Ook voor Garmin Colorado 400c: Gebruikershandleiding (40 pagina's), Snelle referentiehandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (48 pagina's), Belangrijke veiligheidsinformatie (48 pagina's), Gebruikershandleiding (26 pagina's), (Deens) Handboek (48 pagina's)

Pagina afdrukken

Garmin Colorado 400c Gebruikershandleiding

ettInG

tarted

Installing the Batteries

The Colorado operates on two AA batteries (not

included). You can use alkaline, NiMH, or lithium

batteries.

To install the batteries:

1. Remove the battery

cover by lifting the

latch and sliding the

cover off the back of

the Colorado.

2. Insert the batteries,

observing the

diagram molded

into the battery

compartment.

3. Replace the battery

cover by sliding

it back onto the

Colorado and

fastening the latch.

NOTE: Remove batteries when you do not plan

to use the Colorado for several months. Stored

data is not lost when batteries are removed.

Battery cover

Latch

Battery compartment

Turning the Colorado On and Off

To turn the Colorado on:

Press and hold the Power key until the

Garmin logo appears on the Colorado.

To turn the Colorado off:

Press and hold the Power key.

The first time you turn the Colorado on, the GPS

receiver must collect satellite data and establish its

current location.

NOTE: To receive satellite signals, you must be

outdoors and have a clear view of the sky.

When you turn the Colorado on for the first time, the

Colorado sequences through several setup screens:

language selection, time zone, and daylight saving time

mode. For complete information on initial Colorado

setup, see the Colorado Series Quick Start Guide.

Colorado

Series Owner's Manual

™