ALKOTA 210 Specificaties - Pagina 3

Blader online of download pdf Specificaties voor {categorie_naam} ALKOTA 210. ALKOTA 210 19 pagina's.

Pagina afdrukken

DANGER:

MONOXIDE HAZARD

WARNING:

This machine emits carbon

monoxide, a deadly gas, and must be vented

if used in an enclosed area. Improper venting

can cause poor combustion, delayed ignition,

and could result in death or serious injury.

MECHANICAL SAFETY

1. All guards, shields, and covers must be in place

to prevent accidental contact with hazardous

parts.

2. Drive belts must be inspected and tightened

periodically to operate at optimum levels

3. Inspect machine for damaged or worn

components and repair or replace to avoid

potential hazards. Do not operate the

machine if any mechanical failure is noted or

suspected.

ELECTRICAL SAFETY

1. This machine must be electrically grounded.

Failure to have the machine grounded may

result in the operator being electrically shocked

and even death.

2. Do not plug-in or un-plug machine with wet

hands.

3. Keep power cords and connections (connectors)

out of water.

4. If an extension cord must be used to operate

this machine, it should be as short as

possible. The extension cord must be properly

sized and fitted with a grounding type plug and

receptacle.

5. All wiring and electrical connections should

comply with the National Electrical Code (NEC)

and with local codes and practices.

6. Fuses or circuit breakers should be compatible

with machine requirements. (See ELECTRICAL

section of MODEL SPECIFICATIONS for power

requirements.)

7.High voltage may be present within this

machine.

Servicing

performed by properly trained personnel.

Supersedes 09-00 Z08-00443A

CARBON

should

only

FUEL SAFETY

DANGER:

To avoid possible injury, fire, or

explosion,

please read and follow these

instructions.

1. Use only Kerosene, #1 or #2 fuel oil, or #1

Diesel. The use of incorrect fuel may result in

fire or explosion and severe injury to the

operator.

WARNING:

CRANKCASE

CONTAINING GASOLINE OR SOLVENTS.

AVERTISSEMENT:

D'ESSENCE DE PRODUITS DE VIDANGE NI

D'HUILE CONTENANT DE L'ESSENCE OU

DES SOLVANTS

2. Fuel burning equipment must have proper

ventilation for cooling, combustion air, and

exhausting of combustion products.

3. Personnel trained in and familiar with the type

of equipment being serviced should only

perform adjustments to fuel burning

equipment.

Do not refuel machine while it is running or

hot. Allow it to cool sufficiently to prevent

ignition of any spilled fuel. Clean up any spilled

fuel before resuming operation.

SAVE THESE SAFETY

INSTRUCTIONS

DO NOT USE GASOLINE,

DRAININGS,

NE PAS UTILISER

12-03-03 Z08-00443A

OIL