Garmin FUSION XS Series Handleiding voor installatie-instructies - Pagina 3
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin FUSION XS Series. Garmin FUSION XS Series 6 pagina's. Marine wake tower speakers
Ook voor Garmin FUSION XS Series: Handleiding voor installatie-instructies (13 pagina's), Handleiding voor installatie-instructies (11 pagina's), Installatie-instructies (4 pagina's), Handleiding voor installatie-instructies (6 pagina's)
Pagina afdrukken
LED Wiring
It is recommended to install a Fusion RGB Lighting Control Module with these speakers to turn the LEDs on and
off, change the colors, and create lighting effects. See your Fusion dealer or
more information.
You should follow the instructions provided with the remote control to connect the LED wires from the
speakers to the remote control receiver module and to connect the receiver module to power.
If you choose not to install the remote control, you can set the static color of the LEDs by connecting the
colored LED wires directly to the power source
Connecting the LED Wires
You can control the color of the LEDs by connecting the LED color wires to ground. You can splice the ground
wire to multiple LED wires to customize the LED color.
NOTE: Instead of connecting the LED wires for one dedicated color, you can install a remote control to turn the
LEDs on and off, change the color, and create lighting effects. See your Fusion dealer or
www.fusionentertainment.com
1 Connect a positive wire to the black wire on the LED cable.
2 Connect a ground wire to the wire on the LED cable according to the preferred LED color.
LED Color
Red
Green
Blue
Yellow
Magenta
Cyan
White
3 Route the positive and negative wires, and connect them to a power source
Power, page
3).
Connecting the LED Wires to Power
You must connect all 12 Vdc wiring to the LEDs to a 3 A fuse at the power-source end of the cable. You should
connect the positive (+) power wire to a 12 Vdc power source through an isolator switch or circuit breaker to
turn the LEDs on and off. You can use the same isolator or circuit breaker controlling the power supply to your
stereo, which allows you to turn the LEDs and the stereo on and off at the same time.
You should use 20 AWG (0.5 mm
1 Route the positive power (+) and negative ground (-) wires from the LED-wire connections to the battery.
2 Connect the negative wire to the negative (-) battery terminal.
3 Connect the positive wire to the positive (+) terminal through a 3 A fuse and isolator switch or circuit
breaker.
Speaker Information
True-Marine
Products
™
True-Marine products are subjected to rigorous environmental testing under harsh marine conditions to
surpass industry guidelines for marine products.
Any product that bears the True-Marine stamp of assurance has been designed for simplicity of use and
combines advanced marine technologies to deliver an industry leading entertainment experience. All True-
Marine products are supported by the Fusion 3-year worldwide limited consumer warranty.
Fusion XS Series Marine Wake Tower Speakers Installation Instructions
(Connecting the LED Wires, page
for more information.
LED Wire Color
Red
Green
Blue
Red and green
Red and blue
Blue and green
Red, green, and blue
2
) or thicker wire to connect the LEDs to the battery.
www.fusionentertainment.com
3).
(Connecting the LED Wires to
for
3