AEG F45078I-M Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG F45078I-M. AEG F45078I-M 35 pagina's. 18” fully integrated dish washer
Ook voor AEG F45078I-M: Gebruikershandleiding (19 pagina's), Algemene handleiding (43 pagina's)

Pagina afdrukken

INSTALLATION INSTRUCTIONS

A through hole with a diameter of at least 8 cm (5/32") is required to pass the

hoses and power cord (ref. A fi g. 5-05).

Make sure there area no rough edges that could damage the power cord or hoses.

If the dishwasher is installed in a metal unit protect the edge of the through hole

for the hoses and power cord with a gasket. Do not use extension cords when

making the electrical connection as these do not guarantee safety.

ATTENTION!

INSTALLING THE DISHWASHER IN A NARROW SPACE MAY BEND OR

CRUSH THE POWER CORD. TAKE GREAT CARE IN ORDER TO REDUCE THE

POSSIBILITY OF DAMAGING THE POWER CORD WHEN INSTALLING OR

REMOVING THE APPLIANCE.

5.2.1

Connecting to the water supply

PREVENTING THE RISK OF CLOGGING OR DAMAGE: IF THE WATER

PIPE IS NEW OR HAS NOT BEEN USED FOR A LONG TIME, BEFORE CON-

NECTING TO THE WATER SUPPLY CHECK THAT THE WATER IS CLEAR

AND FREE OF IMPURITIES, TO PREVENT DAMAGE TO THE APPLIANCE.

THE DISHWASHER MUST ALWAYS BE CONNECTED TO THE WATER

SYSTEM WITH NEW HOSES; OLD OR USED HOSES MUST NEVER BE

REUSED.

Rev 0.0

Fig. 5-05