Garmin GHP 10V Handleiding voor installatie-instructies - Pagina 2

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GHP 10V. Garmin GHP 10V 20 pagina's. Marine autopilot system
Ook voor Garmin GHP 10V: Handleiding voor installatie-instructies (48 pagina's), Gebruikershandleiding (28 pagina's), Handleiding voor installatie-instructies (20 pagina's)

The GHP 10V autopilot system consists of multiple components, each sold separately. You must know how the components operate together in

order to correctly plan the installation on your boat.

As you familiarize yourself with the GHP 10 components, confirm that your package includes the following items. If any parts are missing,

contact your Garmin dealer immediately.

Main Components

The GHP 10V autopilot system consists of three main components, the Course Computer Unit (CCU), Autopilot Gateway, and the GHC

user control interface.

Course Computer Unit (CCU)

Autopilot Gateway

GHC 10

Use the included cables to connect the GHP 10V components to power, to each other, to an alarm (provided), and to optional devices such as a

NMEA 2000- or NMEA 0183-compatible GPS device.

CCU cable

Use this cable to connect the CCU to the Autopilot Gateway. Additionally,

a portion of this cable contains color-coded wires with bare ends. Use these

wires to connect the CCU to power, to the GHC 10 (yellow signal wire),

and to the included alarm. You can use a NMEA 2000 drop cable to extend

the CCU cable, if necessary, though you should not connect this cable to a

NMEA 2000 network.

Garmin replacement part number: 010-11351-00

Caution: Do not connect this cable to a NMEA 2000 network.

GHP 10V Package Contents and Needed Tools

The CCU acts as the "brain" of the GHP 10V autopilot system. The CCU contains the sensory equipment used to

determine heading and rate of turn. The CCU connects to the Autopilot Gateway, to the GHC 10 (yellow signal

wire), and to the alarm buzzer using the CCU cable. In addition, the CCU also connects to a NMEA 2000 network

to communicate with the GHC 10 and to communicate with an optional NMEA 2000-compatible GPS device.

Garmin replacement part number: 010-11353-00

Serial number

The Autopilot Gateway allows the GHP 10V autopilot system to steer the boat through the Volvo steering system.

The Autopilot Gateway connects to the CCU through the CCU cable and connects to the Volvo steering system

using a proprietary Volvo connector.

Garmin replacement part number: 010-11349-00

Serial number

Use the GHC 10 to operate the GHP 10V autopilot system. Using the GHC 10, you engage and control the

GHP 10V. You also set up and customize the GHP 10V using the GHC 10. The GHC 10 connects to a NMEA 2000

network to communicate with the CCU and with an optional NMEA 2000-compatible GPS device (to use waypoint

and route information). If a NMEA 2000-compatible GPS device is not available, you can wire the GHC 10 to an

optional NMEA 0183-compatible GPS device instead.

Garmin replacement part number: 010-00688-00

Serial number

™

GHP 10V Installation Instructions