Garmin GPS 19x NMEA 0183 Handleiding voor installatie-instructies - Pagina 11

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GPS 19x NMEA 0183. Garmin GPS 19x NMEA 0183 19 pagina's. Gps 19x hvs
Ook voor Garmin GPS 19x NMEA 0183: Handleiding voor installatie-instructies (8 pagina's), Handleiding voor installatie-instructies (48 pagina's), Handleiding voor installatie-instructies (6 pagina's), Handleiding voor installatie-instructies (6 pagina's)

NMEA 0183 Connection Exceptions

The orange accessory on wire is used when connecting the antenna to a Garmin chartplotter, or other NMEA

0183 device that has a defined accessory signal wire. If you are connecting the antenna to a device that does

not have an accessory signal wire, connect the orange wire from the antenna to ground and connect the

antenna power wire to the ignition or install an in-line switch. The antenna will drain the battery of the boat if it

is not switched.

• If your NMEA 0183 compliant device has only one receiving wire (Rx), connect it to the gray wire (Tx/A (Out

+)) from the antenna, and leave the white/red wire (Tx/B (Out -)) from the antenna unconnected.

• If your NMEA 0183 compliant device has only one transmitting wire (Tx), connect it to the white wire (Rx/A

(In +)) from the antenna, and connect the white/orange wire (Rx/B (In -)) from the antenna to ground.

Heading Calibration

After installation is complete, you must calibrate the heading and perform the auto heading alignment to

receive magnetic heading data.

CAUTION