AEG FAVORIT 35080 Vi Gebruikersinformatie - Pagina 28
Blader online of download pdf Gebruikersinformatie voor {categorie_naam} AEG FAVORIT 35080 Vi. AEG FAVORIT 35080 Vi 44 pagina's. Aeg the fully integratable dishwasher
Ook voor AEG FAVORIT 35080 Vi: Gebruikersinformatie (40 pagina's)
Pagina afdrukken
What to do if...
Remedying small malfunctions
If the acoustic signal is activated, warning tones sound if there are
faults.
If while the appliance is operating indicators on the control panel flash
or are lit up as described in the following table, please consult this to
find out how to remedy the fault.
After remedying the fault that is flashing in the first or second
rhythm in the programme progress display, press the button for the
dishwashing cycle that had already started. The cycle will continue.
In the case of other fault messages:
– Cancel the dishwashing cycle.
– Switch the appliance off and on again.
– Select dishwashing cycle.
If the fault is displayed again, please contact the Service Force Centre
and inform them of the fault message.
Malfunction
1 short warning tone,
continuously repeated,
can be heard,
the programme display for
the selected wash pro-
gramme is flashing:
the indicator for the end
of the wash programme is
flashing once
continuously .
(problems with water in-
flow).
28
Possible cause
Tap is blocked with limes-
cale or is faulty.
The tap is turned off.
The filter (where present) in
the threaded hose fitting
on the tap is blocked.
Filters in the base of the
washing compartment are
blocked.
Water inflow hose has not
been correctly positioned.
Remedy
Check the tap and have it
repaired, if necessary.
Turn on the tap.
Clean the filter in the
threaded hose fitting.
Cancel the dishwashing cy-
cle (see chapter: Starting a
dishwashing cycle),
clean filters (see chapter:
Cleaning the filters),
then start the dishwashing
cycle again.
Check the position of the
hose.