Garmin PN 906-2001-00 Basishandleiding - Pagina 9

Blader online of download pdf Basishandleiding voor {categorie_naam} Garmin PN 906-2001-00. Garmin PN 906-2001-00 9 pagina's. Garmin marine instruments user manual

Pagina afdrukken

Compass Calibration

Example of button sequence below;

Autopilot in Standby

1) Put the autopilot in Setup mode by momentarily pressing

the setup LED should be lit on the

Hand Held

2) Now press

button the 4 LED will now be on. Now press

button the 7 LED will now be

on and display code "47"

3) Press and hold the

button, now press and release the Deckmount (on/off)

button quickly,

the Up Arrow LED

will now

come on now release button

4) Steer your boat (with the tiller or main engine) on a steady heading, in forward at a low RPM.

5) When Up Arrow LED starts blinking

steer your boat in a medium to slow starboard turn (with

tiller or main engine) and start your first 360 degree circle.

6) When approximately 3 circles are complete

and

LED's will extinguish and the Up and

Down Arrow LED's will light solid for about 5 seconds

the system will then shut down

completely, the compass calibration is complete

If Up and Down Arrows both continue to blink and does not power down after 5 seconds, the compass

Calibration failed. Shut down system completely and re calibrate compass.