Garmin GTX 3X5 Series Handleiding voor piloten - Pagina 30

Blader online of download pdf Handleiding voor piloten voor {categorie_naam} Garmin GTX 3X5 Series. Garmin GTX 3X5 Series 34 pagina's. All-in-one ads-b transponder
Ook voor Garmin GTX 3X5 Series: Handleiding voor piloten (20 pagina's)

Garmin GTX 3X5 Series Handleiding voor piloten
7 – TROUBLESHOOTING
7.2
Transponder System Messages
NOTE
Messages are not high priority. Their purpose is to provide additional
information on abnormal system behavior. They do not require
immediate pilot action. Any transponder failure will immediately display
an alert with no pilot action necessary to view the alert.
To view new messages:
1. Press FUNC key to SYS group.
2. Press CRSR then ENT key to view message.
GTX 3X5
SYSTEM MESSAGE
1090 ADS-B In Failed
1090 ADS-B Out Failed
ADS-B In Failed
ADS-B In Traffic Alerting Failed The GTX 3X5 does not have
7-2
Table 7-1 Troubleshooting
EXPLANATION
The GTX 3X5 has detected a
1090 receiver fault. Traffic
picture may not be
complete.
The unit cannot transmit
ADS-B messages. Note: This
message is present regardless
of
whether 1090 ES is on or
off.
The GTX 3X5 has detected a
fault in both 1090 and UAT
receivers. ADS-B IN traffic
and FIS-B will not be
available.
enough information to
provide traffic alerting on
ADS-B targets.
Garmin GTX 335/345 Pilot's Guide
FLIGHT CREW ACTION
Contact dealer for service.
Contact dealer for service.
Contact dealer for service.
1. Check power and/or circuit breaker for
the GPS position source (e.g., GTN or
GNS).
2. Make sure the GPS antenna has a clear
view of the sky and provide enough
time for the GPS position source to
obtain a position fix. Extended periods
between use or GPS position source
disconnection from the aircraft battery
could cause a longer than normal GPS
satellite acquisition time. If problem
persists, contact dealer for service.
190-01499-00 Rev. A