Garmin Alpha 100 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin Alpha 100. Garmin Alpha 100 26 pagina's. Multi-dog tracking gps
Ook voor Garmin Alpha 100: Snelle referentie (2 pagina's), Productinformatie (4 pagina's), Gebruikershandleiding (24 pagina's), Gebruikershandleiding (26 pagina's), Gebruikershandleiding (27 pagina's), Gebruikershandleiding (24 pagina's)
5
Select Start.
6
Follow the on-screen instructions.
7
When the confidence status bar reaches 100%, select Save.
For best results, collect 4 to 8 samples for the waypoint, waiting
at least 90 minutes between samples.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
Select
> Waypoint Manager.
2
Select a waypoint.
3
Select
> Project Waypoint.
4
Enter the bearing, and select
5
Select a unit of measure.
6
Enter the distance, and select
7
Select Save.
Deleting a Waypoint
1
Select
> Waypoint Manager.
2
Select a waypoint.
3
Select
> Delete > Yes.
Routes
A route is a sequence of waypoints or locations that leads you
to your final destination.
Creating a Route
1
Select
> Route Planner > Create Route > Select First
Point.
2
Select a category.
3
Select the first point on the route.
4
Select Use > Select Next Point.
5
Select and repeat steps 3 through 5 to add all the points in
the route.
6
Select
.
Editing the Name of a Route
1
Select
> Route Planner.
2
Select a route.
3
Select Change Name.
4
Enter the new name, and select
Navigating a Saved Route
1
Select
> Route Planner.
2
Select a route.
3
Select View Map > Go.
4
Navigate using the compass
Editing a Route
1
Select
> Route Planner.
2
Select a route.
3
Select Edit Route.
4
Select a point.
5
Select an option:
• To view the point on the map, select View Map.
• To change the order of the points on the route, select
Move Up or Move Down.
• To insert an additional point on the route, select Insert.
The additional point is inserted before to point you are
editing.
• To remove the point from the route, select Remove.
10
.
.
.
(page
11) or map
(page
11).
Reversing a Route
1
Select
> Route Planner.
2
Select a route.
3
Select Reverse Route.
Viewing a Route on the Map
1
Select
> Route Planner.
2
Select a route.
3
Select View Map.
Viewing the Active Route
1
Select
> Active Route.
2
Select a point in the route to view additional details.
Deleting a Route
1
Select
> Route Planner.
2
Select a route.
3
Select Delete Route > Yes.
Tracks
A track is a recording of your path. The track log contains
information about points along the recorded path, including
time, location, and elevation for each point.
Recording Track Logs
1
Select
> Setup > Tracks > Track Log.
2
Select Record, Do Not Show or Record, Show On Map.
If you select Record, Show On Map, a line on the map
indicates your track.
3
Select Record Method.
4
Select an option:
• To record tracks at a variable rate that create an optimum
representation of your tracks, select Auto.
• To record tracks at a specified distance, select Distance.
• To record tracks at a specified time, select Time.
5
Select Interval.
6
Complete an action:
• If you selected Auto for the Record Method, select an
option to record tracks more or less often.
NOTE: Using the Most Often interval provides the most
track detail, but fills up the device memory quicker.
• If you selected Distance or Time for the Record Method,
enter a value, and select
As you move with the device turned on, a track log is created.
Viewing Details about the Track
1
Select
> Track Manager.
2
Select a track.
3
Select View Map.
The beginning and the end of the track are marked by flags.
4
Select the information bar along the top of the screen.
Information about the track is listed.
Viewing the Elevation Plot of a Track
1
Select
> Track Manager.
2
Select a track.
3
Select Elevation Plot.
Navigating to the Start of a Track
You can navigate back to the beginning of a track. This can be
helpful when finding your way back to camp or the trail head.
1
Select
> Track Manager > Current Track > View Map.
2
Select TracBack.
.
Waypoints, Routes, and Tracks