Garmin Alpha 100 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin Alpha 100. Garmin Alpha 100 26 pagina's. Multi-dog tracking gps
Ook voor Garmin Alpha 100: Gebruikershandleiding (26 pagina's), Snelle referentie (2 pagina's), Productinformatie (4 pagina's), Gebruikershandleiding (24 pagina's), Gebruikershandleiding (27 pagina's), Gebruikershandleiding (24 pagina's)

Pagina afdrukken

Dog Collar Device Setup

Methods to Add a Dog Collar Device to a

Handheld Device

If you purchased the dog collar device and the handheld device

separately, you must add the dog collar device to the handheld

device. You can add up to 20 dog collar devices to one

handheld device.

Using MURS/VHF: Allows you to add a dog collar device after

you have placed the dog collar device into pairing mode by

pressing the power key.

This method is helpful when you are adding a new accessory

collar to the system prior to leaving for the hunt

Dog Over

MURS/VHF).

Entering the track and train codes: Allows you to add a dog

collar device that you do not own and that is not in the area.

The dog's owner must determine if you can only track the

dog or can track and train the dog. This method requires the

dog's owner to find and communicate the codes to the

person adding the dog collar device.

This method is helpful when you would like to add a dog

collar device during a hunt, but you are not near the dog. For

example, you are adding another member of your hunting

party's dog collar device to your handheld device, but you do

not own the dog collar device

and Train

Codes).

NOTE: This feature varies based on dog collar device type

and feature availability in your area. You may see track

codes only or track and train codes.

Sharing wirelessly using ANT+™ wireless technology:

Allows you to add a dog collar device that you do not own

and that is not in the area. The dog's owner must determine

if you can only track the dog or can track and train the dog.

This method does not require the dog's owner to find and

communicate the codes to the person adding the dog collar

device. This method also adds dog information, such as the

dog's name, communication settings, and initial position,

from the sending handheld device to your device. The two

handheld devices must be within range 3 m (10 ft.) to share

data wirelessly.

This method is helpful when you want to add a dog collar

device during a hunt, but you are not near the dog. For

example, the dogs have already been let loose, and you are

near the dog owner, who can share the dog wirelessly

(Sharing a Dog

Wirelessly).

VHF Radio Information

This product may be used only on specific radio frequencies,

which vary depending on the country of use. See the product

packaging or go to

www.garmin.com/tracking-legal

about the radio frequency of this product.

Adding a Dog Over MURS/VHF

If the dog collar device is on, turn off the dog collar device

(Turning Off the

Devices).

Hold

until the dog collar device emits two series of beeps

(about 2 seconds), and then release .

The status LED flashes rapidly in green. The dog collar

device is now ready to be linked, or paired, with a handheld

device.

On the handheld device, select Dog List > Add Dog.

Bring the dog collar device near the handheld device, and

select Yes.

After successfully adding the dog collar device, enter the

name of the dog, and select

Dog Collar Device Setup

(Adding a

(Adding a Dog Using the Track

for details

> OK.

Adding a Dog Using the Track and Train Codes

NOTE: This feature varies based on dog collar device type and

feature availability in your area.

Before you can add a dog using the track and train codes, the

dog owner must find the track and train codes

ID and Track and Train

Codes) and tell them to you.

If you are not near the dog you want to add or you cannot put

the collar into pairing mode, you can add the dog using the track

and train codes.

Select Add Dog.

When asked if you are near the collar, select No.

When asked if you know the track and train codes, select

Yes.

Enter the track or train code for the collar, and select

The dog's track code allows you to track the dog. The dog's

train code allows you to both track and train the dog.

Enter the name of the dog, and select

Finding the Dog ID and Track and Train Codes

You can share a dog's track code so another person can view

your dog's location with the map and dog tracking compass.

Also, you can share a dog's train code so another person can

track your dog and train (correct) your dog.

Select Dog List.

Select a dog.

Select Show Info.

Sharing a Dog Wirelessly

Before you can share data wirelessly over ANT+, you must

bring your Alpha handheld device within 10 ft. (3 m) of the other

handheld device.

Select Dog List.

Select the dog to share.

Select Share Wirelessly.

Select an option:

• To allow the other person only to track your dog's location

with the map and dog tracking compass, select Track

Only.

• To allow the other person to track your dog and correct

your dog's behavior, select Track and Train.

On the other handheld device, select Dog List >

Receive Wirelessly.

Editing Dog Information

Resetting a Dog's Statistics and Track

You might want to clear the dog statistics and track before a

new hunt.

Select Dog List.

Select a dog.

Select Show Info > Reset > Yes.

Changing the Length of the Dog's Track

You can adjust the length of the dog's tracks shown on the map.

Showing less tracks on the map can help to declutter the map

view. Changing the length of the track shown on the map does

not affect the tracks stored in the internal memory.

Select Setup > Dogs > Dog Track On Map.

Select an option to show more or less of the tracks on the

map.

Changing the Dog Name

Select Dog List.

Select a dog.

(Finding the Dog

> OK.