Garmin Alpha 100 T5 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin Alpha 100 T5. Garmin Alpha 100 T5 26 pagina's.
Pagina afdrukken
You should calibrate the compass after moving long distances,
experiencing temperature changes, or removing the battery.
1
Select
> Compass >
2
Follow the on-screen instructions.
Navigating with the Bearing Pointer
When navigating to a destination,
regardless of the direction you are moving.
1
While navigating to a destination, select
2
Turn until
points toward the top of the compass, and
continue moving in that direction to the destination.
Course Pointer
The course pointer is most useful if you are navigating on water
or where there are no major obstacles in your path. It also helps
you avoid hazards to either side of the course, such as shoals or
submerged rocks.
To enable the course pointer, from the compass, select
Setup Heading > Go To Line/Pointer > Course (CDI).
The course pointer
indicates your relationship to the course
line leading to the destination. The course deviation indicator
(CDI)
provides the indication of drift (right or left) from the
course. The scale
refers to the distance between dots
the course deviation indicator, which tell you how far off course
you are.
Where To? Menu
You can use the Where To? menu to find a destination to
navigate to. Not all Where To? categories are available in all
areas and maps.
Finding a Waypoint by Name
1
Select
> Where To? > Waypoints >
2
Enter the name.
3
Select
.
Finding a Waypoint Near Another Waypoint
1
Select
> Waypoint Manager.
2
Select a waypoint.
3
Select
> Find Near Here.
4
Select a category.
The list displays waypoints near the original waypoint.
Navigating with Sight 'N Go
You can point the device at an object in the distance, lock in the
direction, and navigate to the object.
1
Select
> Sight 'N Go.
2
Point the device at an object.
3
Select Lock Direction > Set Course.
4
Navigate using the compass
Pointer, page
10) or map
Elevation Plot
By default, the elevation plot displays the elevation for an
elapsed time. You can customize the plot
Type, page
10) and the data fields
Fields, page
11).
10
> Calibrate Compass > Start.
points to your destination,
> Compass.
> Spell Search.
(Navigating with the Bearing
(Map, page
9).
(Changing the Plot
(Customizing the Data
To open the elevation plot, select
Calibrating the Barometric Altimeter
You can manually calibrate the barometric altimeter if you know
the correct elevation or the correct barometric pressure.
1
Go to a location where the elevation or barometric pressure
is known.
2
Select
> Elevation Plot >
3
Follow the on-screen instructions.
Navigating to a Point on the Plot
1
Select
> Elevation Plot.
2
Select an individual point on the plot.
Details about the point appear in the upper-left corner of the
plot.
3
Select
> View Map.
4
Select the information bar along the top of the screen.
>
5
Select Go.
6
Navigate using the compass
Pointer, page
10) or map
Changing the Plot Type
You can change the elevation plot to display pressure and
elevation over time or distance.
1
Select
> Elevation Plot >
2
Select an option.
Resetting the Elevation Plot
Select
> Elevation Plot >
Track > Yes.
on
Trip Computer
The trip computer displays your current speed, average speed,
maximum speed, trip odometer, and other helpful statistics. You
can customize the trip computer layout, dashboard, and data
fields
(Customizing the Data Fields, page
To open the trip computer, select
Resetting the Trip Computer
For accurate trip information, reset the trip information before
beginning a trip.
Select
> Trip Computer >
> Yes.
Setting a Proximity Alarm
Proximity alarms alert you when you or your dogs are within a
specified range of a particular location. A tone sounds when you
enter the designated radius.
1
Select
> Proximity Alarms.
2
Select Create Alarm.
3
Select a category.
4
Select a location.
5
Select Use.
6
Enter a radius.
When you enter an area with a proximity alarm, the device
sounds a tone.
Calculating the Size of an Area
1
Select
> Area Calculation > Start.
2
Walk around the perimeter of the area you want to calculate.
3
When finished, select Calculate.
> Elevation Plot.
> Calibrate Altimeter.
(Navigating with the Bearing
(Map, page
9).
> Change Plot Type.
> Reset > Clear Current
11).
> Trip Computer.
> Reset > Reset Trip Data
Applications
Applications