AEG OKO FAVORIT 54750 VI Gebruiksaanwijzing - Pagina 28

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG OKO FAVORIT 54750 VI. AEG OKO FAVORIT 54750 VI 32 pagina's. Aeg dishwasher

Installation

Connecting the water supply

Connect your dishwasher to a cold water supply only.

Never connect your dishwasher to open hot water appliances and continuous

flow heaters!

Avoid bends or kinks in the hose which could prevent or slow down the water supply.

If the machine is connected to new pipes or pipes which have not been used for a long time,

you should run the water for a few minutes before connecting the inlet hose. This will prevent

deposits of sand or rust clogging the inlet hose.

The water pressure must be within the limits given in the technical specifications.

Your dishwasher has been built in accordance with the valid regulations governing

water-consuming appliances and is equipped with safety devices which prevent used water

from flowing back into the drinking water mains.

Do not use, for connection, old hoses which have been used in another appliance.

The end of the drain hose can be connected as follows:

1. To the sink outlet siphon, securing it if necessary with a clip.

2. To a wall outlet provided with vent-hole, minimum internal diameter 4 cm.

CS13

The waste connection must be at a height of between 30 cm (minimum) and 100 cm

(maximum) from the floor.

It makes no difference which way the drain hose faces, either to the right or left of the

dishwasher.

Avoid bending or kinking the hose as this could prevent or slow down the discharge of water.