AEG 21604 G Bedienings- en installatiehandleiding - Pagina 21

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} AEG 21604 G. AEG 21604 G 26 pagina's. Gas hob
Ook voor AEG 21604 G: Bedienings- en installatie-instructies (27 pagina's)

Pagina afdrukken

1. Description of the Hob
2. Engineer Technical Data
3. Cut out Size

Permanent Connection

In the case of a permanent connection, it is necessary that you install

a double pole switch between the hob and the electricity supply

(mains), with a minimum gap of 3 mm. between the switch contacts

and of a type suitable for the required load in compliance with the

current electric regulations.

The switch must not break the yellow and green earth cable at any

point.

Ensure that the hob supply cord does not come into contact with

surfaces with temperatures higher than 50 deg. C.

Wiring diagram

A. IGNITOR SWITCH

B. IGNITOR UNIT

220/240