Brother MFC-J6935DW Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Brother MFC-J6935DW. Brother MFC-J6935DW 2 pagina's.
Ook voor Brother MFC-J6935DW: Handleiding voor snelle installatie (2 pagina's), Handleiding productveiligheid (20 pagina's)
Pagina afdrukken
MFC-J3930DW / MFC-J6930DW / MFC-J6935DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
1
Unpack the machine and check the components
The components included in the box may differ depending on your country.
Inbox Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Watch our FAQ videos for help
with setting up your Brother
machine.
solutions.brother.com/videos
2
Load plain A4 paper
For loading other sizes of paper, see Paper Handling in the Reference Guide.
Pull the paper tray completely out of
the machine as shown by the arrow.
3
Connect the power cord
(Example for UK)
6
Install the inbox ink cartridges
Open the ink cartridge cover, and then
remove the orange protective part
from the machine.
NOTE
Follow the Touchscreen instructions to store
the orange protective part inside the machine.
If you must transport the machine, remove
the ink cartridges and replace this part.
9
Connect the telephone line cord
If you are not using your machine as a fax, go to
Lift the scanner cover.
Quick Setup Guide
Reference Guide
Product Safety Guide
Maintenance Sheet
Fan the paper well.
Connect the power cord. The machine will
power on automatically.
NOTE
You can adjust the control panel angle to read
the Touchscreen more easily.
Follow the Touchscreen instructions to unpack and install the ink cartridges.
The machine will prepare the ink tube system for printing.
10
.
(Example for UK)
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine.
The latest manuals are available at the Brother Solutions Center:
solutions.brother.com/manuals
(for UK)
Brother
Telephone Line Cord
Installation Disc
Power Cord
Do not exceed this
mark (bbb).
Adjust the paper guides.
Load the paper in the tray.
Select your country
4
or language
(Initial setup only)
After turning the machine on, you may need to set your
country or language (depending on your machine).
If required, follow the Touchscreen instructions.
Quickly shake just the black
ink cartridge horizontally
15 times as shown, before
inserting it into the machine.
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below.
a. Extension telephone
b. External telephone
NOTE
• Most of the illustrations in this Quick Setup Guide show the
MFC-J6930DW.
• Save all packing materials and the box in case for any reason you
(for others)
must ship your machine.
• You must purchase the correct interface cable for the
interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
Ethernet (Network) cable
Use a straight-through Category5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
Slowly push the paper tray
Pull out the paper support
completely into the machine.
until it locks into place.
5
Set the date and time
Follow the Touchscreen instructions to set the date
and time.
7
Machine settings
When the machine has finished the initial cleaning
process, follow the Touchscreen instructions to
configure the machine's settings.
• Check print quality
• Configure the tray settings
• View operation tips
• Set Brother LCD Message defaults
• Print the installation sheet
Select your language
8
(if needed and only for
certain models)
1.
Press
[Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2.
Press your language.
3.
Press
.
1
2
Close the scanner cover.
D00DJN001-00
UK
Version 0