AEG 35940G Bedienings- en installatiehandleiding - Pagina 26

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} AEG 35940G. AEG 35940G 26 pagina's. Gas hobs
Ook voor AEG 35940G: Bedienings- en installatie-instructies (26 pagina's), Bedienings- en installatie-instructies (26 pagina's), Bedienings- en installatie-instructies (26 pagina's), Bedienings- en installatie-instructies (27 pagina's)

It is important to note that this model is designed for use with natural gas

but can be converted for use with butane or propane gas providing the

correct injectors are fitted and the gas rate is adjusted to suit.

Method

1) Ensure that the gas taps are in the 'OFF' position

2) Isolate the hob from the electricity supply

3) Remove all pan supports, burner caps, rings, crowns and control knobs.

4) With the aid of a 7mm box spanner the burner injectors can then be

unscrewed and replaced by the appropriate LPG injectors.

TO ADJUST THE GAS RATE

With the aid of a thin bladed screwdriver completely tighten down the

by pass adjustment screw, which is located down the centre of the gas

tap control shaft. Upon completion stick the replacement rating plate

on the under side of the hob.

IMPORTANT

The replacement/conversion of the gas hob should only be

undertaken by a competent person