Brother MFC-L9550CDW Handleiding voor snelle installatie
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother MFC-L9550CDW. Brother MFC-L9550CDW 2 pagina's. How to replace the drum unit
Ook voor Brother MFC-L9550CDW: Handleiding productveiligheid (28 pagina's), Snelstarthandleiding (7 pagina's), Handleiding voor snelle installatie (2 pagina's)
Pagina afdrukken
DCP-L8400CDN / MFC-L8600CDW
MFC-L8850CDW / MFC-L9550CDW
Quick Setup Guide
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
1
Remove the packing material from the machine
1
2
2
Load paper in the paper tray
Connect the power cord and turn on
3
the machine
5
Configure the machine for faxing (for MFC models)
If you do not plan to use the fax feature on this machine, go to step 6.
Connect the telephone line cord
Waste Toner Box
Telephone Line Cord
(pre-installed)
For MFC models
Belt Unit
(pre-installed)
3
4
Adjust the paper guides.
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Quick Setup Guide
Product Safety Guide
Basic User's Guide
For MFC models
Power Cord
CD-ROM
4
Select your language
1.
Press
> All Settings > Initial Setup >
Local Language
2.
Press your language.
3.
Press
.
Set the date and time
Press
>
Date
1.
Press
Date.
2.
Enter the last two digits of the year using the numbers on the Touchscreen, and then press
3.
Enter the two digits for the month using the Touchscreen, and then press
4.
Enter the two digits for the day using the Touchscreen, and then press
Clock Type
Clock Type.
1.
Press
2.
Press
12h Clock or 24h Clock.
Time
Time.
1.
Press
2.
Enter the two digits for the time using the Touchscreen.
(12h Clock only)
Press
to select AM or PM.
3.
Press
OK.
4.
Press
.
NOTE:
•
To configure the machine for faxing, see the
•
Your machine is programmed to automatically receive faxes.
To change this default mode, see the Basic User's Guide.
Read the Product Safety Guide first, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
•
The components included in the box and the AC power plug
connection may differ depending on your country.
•
The illustrations in this Quick Setup Guide are based on the
MFC-L8850CDW.
•
You must purchase the correct interface cable for the interface you
want to use:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1
2
OK.
OK.
Basic User's Guide.
Version 0
USA/CAN
3
OK.