Brother MFC-T800W Geavanceerde gebruikershandleiding - Pagina 32

Blader online of download pdf Geavanceerde gebruikershandleiding voor {categorie_naam} Brother MFC-T800W. Brother MFC-T800W 39 pagina's.
Ook voor Brother MFC-T800W: Geavanceerde gebruikershandleiding (40 pagina's), Geavanceerde gebruikershandleiding (46 pagina's), Snelstarthandleiding (29 pagina's)

Packing and shipping

the machine

When you transport the machine, use the

packing materials that came with your

machine. Follow the instructions below to

correctly package your machine. Damage

caused to your machine during transit may

not be covered by your warranty.

The machine should be adequately insured

with the carrier.

IMPORTANT

It is important to allow the machine to

"park" the print head after a print job.

Listen carefully to the machine before

unplugging it to make sure that all

mechanical noises have stopped. Not

allowing the machine to finish this parking

process may lead to print problems and

possible damage to the print head.

Unplug the machine from the electrical

socket.

Place both hands under the plastic tabs

on both sides of the machine to lift the

scanner cover into the open position.

Then unplug the machine from the

telephone wall socket and take the

telephone line cord out of the machine.

Unplug the interface cable from the

machine, if it is connected.

Lift the scanner cover (1) to release the

lock. Gently push the scanner cover

support down (2) and close the scanner

cover (3) using both hands.

CAUTION

Be careful not to pinch your fingers when

you close the scanner cover.

Open the ink tank cover.

Make sure the cap of the ink tank is

tightened properly.

Press the cap down to tighten it securely

onto the ink tank, and then close the ink

tank cover.

3 3