AEG 79902 Gebruiksaanwijzing - Pagina 30

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG 79902. AEG 79902 44 pagina's. Electronic gas hob

Electrical connections

Any electrical work required to install this

hob should be carried out by a qualified

electrician or competent person, in

accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these

safety measures not be observed.

This hob is designed to be connected to a 230 V 50 Hz

AC electrical supply.

Before switching on, make sure the electricity

supply voltage is the same as that indicated on

the hob rating plate. The rating plate is located

on the bottom of the hob. A copy is attached on

the back cover of this book.

The hob is supplied with a 3 core flexible supply

cable incorporating a 3amp plug fitted. In the

event of having to change the fuse, a 3amp ASTA

approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any

reason, the wires in the mains lead are coloured

in accordance with the following code:

Green and Yellow

Blue

Brown

— Connect the green and yellow (earth) wire

to the terminal in the plug which is

marked with the letter 'E' or the earth

symbol

or coloured green and yellow.

— Connect the blue (neutral) wire to the

terminal in the plug which is marked with

the letter 'N' or coloured black.

— Connect the brown (live) wire to the

terminal in the plug which is marked with

the letter 'L' or coloured red.

- Earth

- Neutral

- Live