Brother DCP-J925DW Handleiding voor snelle installatie - Pagina 37
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother DCP-J925DW. Brother DCP-J925DW 38 pagina's. Network glossary - spanish
Ook voor Brother DCP-J925DW: Handmatig (21 pagina's), (Spaans) Handboek (21 pagina's)
Pagina afdrukken
For Network Users
Reset the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b
Press Menu.
c
Press Network.
d
Press a or b to display Network Reset and press Network Reset.
e
Press Yes.
f
Hold down Yes for 2 seconds to confirm.
g
The machine will restart, re-connect cables once this is complete.
Entering Text for Wireless Settings
Up to four letters are assigned to each letter button on the Touchscreen. By pressing the correct button repeatedly,
you can access the character you want.
Press
to cycle between letters, numbers and special characters. (The characters available may differ
depending on your country.)
Inserting spaces
To enter a space, press
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character, press
. Re-enter the correct character. You can also back up and insert a character.
Repeating characters
If you need to enter a character that is on the same button as the character before, press c to move the cursor to
the right before you press the button again.
then press the space button
or
.
37