Brother DCP-L2500D Handleiding productveiligheid - Pagina 12

Blader online of download pdf Handleiding productveiligheid voor {categorie_naam} Brother DCP-L2500D. Brother DCP-L2500D 23 pagina's. Brother mfps & printers product safety guide
Ook voor Brother DCP-L2500D: Handleiding voor snelle installatie (2 pagina's), Drumeenheid vervangen (12 pagina's), Navulinstructies (8 pagina's), Handleiding voor snelle installatie (2 pagina's)

Connecting the product safely

WARNING

There are high voltage electrodes inside the product. Before you clean the inside of the product,

make sure you have unplugged the telephone line cord first (MFC only) and then the power cord

from the electrical socket. Doing this will prevent an electrical shock.

DO NOT use the AC power cord to pull or push the plug into the wall socket, use the finger grips

on the plug.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

Always make sure the plug is fully inserted.

This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a

qualified electrician.

This product is equipped with a 3-wire earthed plug. This plug will only fit into an earthed power

outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call your

electrician to replace your obsolete outlet. DO NOT defeat the purpose of the earthed plug.