Brother DCP-T300 Geavanceerde gebruikershandleiding - Pagina 36
Blader online of download pdf Geavanceerde gebruikershandleiding voor {categorie_naam} Brother DCP-T300. Brother DCP-T300 40 pagina's.
Ook voor Brother DCP-T300: Snelstarthandleiding (25 pagina's), Geavanceerde gebruikershandleiding (39 pagina's), Geavanceerde gebruikershandleiding (46 pagina's)
Pagina afdrukken
External telephone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine rings (when the Receive Mode
setting is Fax/Tel) to notify you to pick up
a voice call that it answered.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 196 dpi. It is used for
small print and graphs.
Greyscale
The shades of grey available for copying,
scanning and faxing photographs.
Group number
A combination of Speed Dial numbers that
are stored in a Speed Dial location for
Broadcasting.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal reports. You can print the Fax
Journal report on demand without
interrupting the cycle.
32
LCD (Liquid Crystal Display)
The display screen on the machine that
shows interactive messages during On-
Screen Programming and shows the date
and time when the machine is idle.
Manual fax
When you lift the handset of your external
telephone you can hear the receiving fax
machine answer before you press
Mono Start to begin sending the fax.
Memory Receive
Receives faxes into the machine's
memory when the machine is out of paper.
Menu mode
Programming mode for changing your
machine's settings.
OCR (optical character recognition)
(MFC models only)
Nuance™ PaperPort™ 12SE or Presto!
PageManager software application
converts an image of text to text you can
edit.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing Speed Dial numbers. Press
Redial/Pause key on the control panel as
many times as needed for longer pauses.
Photo resolution
A resolution setting that uses varying
shades of grey for the best representation
of photographs.
Pulse
A form of rotary dialling on a telephone
line.
Real Time Transmission
When the memory is full, you can send
faxes in real time.