Brother DCP120C - Flatbed Multifunction Photo Capture Center Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Brother DCP120C - Flatbed Multifunction Photo Capture Center. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 pagina's. Quick setup guide - french
Ook voor Brother DCP120C - Flatbed Multifunction Photo Capture Center: Handleiding voor snelle installatie (24 pagina's), Referentielijst onderdelen (30 pagina's), Handleiding voor snelle installatie (33 pagina's), (Frans) Snelle installatiegids (24 pagina's)

Fan the stack of paper well to avoid paper jams

and misfeeds.

Gently put the paper into the paper tray print

side down and top edge first.

Check that the paper is flat in the tray and

below the maximum paper mark (1).

Note

• Make sure the paper side guides touch the sides

of the paper.

• Be careful that you do not push the paper in too

far; it may lift at the back of the tray and cause

paper feed problems.

Put the output paper tray back on and push the

paper tray firmly back into the machine.

Installing the power cord

Connect the power cord.

Improper Setup

DO NOT connect the USB cable yet.

Warning

The machine must be fitted with an earthed plug.

Note

The control panel warning LED will stay on until

you have installed the ink cartridges.

After connecting the power cord, the LCD

shows:

Select language

Press Set Key

Press Set.

English

Select ab & Set

Press a or b to choose your language and

press Set.

English?

a Yes b No

Setting Up the Machine