Brother GTX Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother GTX. Brother GTX 16 pagina's. Step by step photo instructions
Ook voor Brother GTX: Uitpakhandleiding (17 pagina's), Standmontage (5 pagina's)
Pagina afdrukken
Watch the Video: Cleaning the Nozzle Guard, Wiper Blade,
Suction and Exhaust Caps
WEEKLY MAINTENANCE PROCEDURES
To achieve a good weekly maintenance you will have to do the following actions:
7
days
+ Suction Cap Cleaning
+ Wiper Cleaning
Always use this menu to perform cleanings or replace parts:
Menu
>
Maintenance
Suction Cap & Exhaust Cleaning
The black silicon lips of the two suction caps should be cleaned using the Cleaning
Stick T dipped in Cleaning Solution. Carefully remove any build-up of dried ink sitting
on the lips of the suction caps. This will prevent air leaks and keep the good suction of
the pumps.
Be careful not to touch the foam - keep it flat.
The four extrusion lances (see in the blue circle...) and the
hole sitting on the side of the capping at the Exhaust position
also need to be cleaned and free of dried ink.
Always clean the Exhaust hole first, then proceed backward to
clean the lances.
Suction Cap Cleaning
W E E K L Y M A I N T E N A N C E
Maintenance Part Clean/Replace
>
Exhaust Cleaning
WEEKLY MAINTENANCE
+ Exhaust Cleaning
+ Nozzle Guards Cleaning
and follow instructions on the display
>
MENU
MENU
OK
OK
TO BE DONE EVERY WEEK
!
Direction to clean
9