Brother GTX pro Referentiehandleiding - Pagina 7

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Brother GTX pro. Brother GTX pro 13 pagina's. Garment printer
Ook voor Brother GTX pro: Snelle gebruikershandleiding (15 pagina's), Gebruikershandleiding (16 pagina's), Installatiehandleiding (40 pagina's)

To achieve a good weekly maintenance you will have to do the following actions:

days

W E E K L Y M A I N T E N A N C E

+ Suction Cap Cleaning

+ Wiper Cleaning

> Always use this menu to perform cleanings or replace parts:

Maintenance

Suction Cap & Exhaust Cleaning

The black silicon lips of the two cappings should be cleaned with the

Stick T dipped in Cleaning Solution.

It is necessary to remove the build-up of the remaining ink staying on the edges of

the cappings. It will prevent air leakage and keep the good suction of the pumps!

Be careful not to touch the foam! Keep it flat!

The four extrusion lances

sitting on the side of the capping at the Exhaust position

need also to be cleaned and free of dried ink.

Always clean first the hole at the front and go backward

while cleaning the lances and finish carefully by the last hole!

Suction Cap Cleaning

Maintenance Part Clean/Replace

[see in the blue circle]

Exhaust Cleaning

WEEKLY MAINTENANCE

+ Exhaust Cleaning

+ Nozzle Guards Cleaning

and follow instructions on the display

and the 2 holes

TO BE DONE EVERY WEEK

NEW

Cleaning

Direction to clean